Regarding tiled roof restoration, most roofing specialists recommend using concrete tiles as they are one of the most durable materials for restoring roofs.
Made of cement, sand, and water, concrete tiles are commonly used for constructing roofs because they can withstand strong winds, fire, and other climatic factors. You can find these tiles in many different colours, like black, grey, red, etc., to complement your home’s design and style.
However, like all other roofing materials, concrete tiles also tend to get cracked, damaged, or worn out over time. In such a case, you will want to replace or restore them.
When choosing the latter, you should know that tiled roof restoration looks at the roof as a whole and, thus, involves upgrading the entire roof. It’s an economical and environmentally friendly alternative to replacing damaged roofs.
This guide discusses the signs, process, and cost of restoring the concrete tiled roof.
Even though you practice regular maintenance, clean the tiled roof constantly, and check for damages, it might still get to the state where it needs restoration.
Fortunately, concrete tiles are considered the perfect material for renovation. The following listed are some signs that you need to restore your concrete tiled roof:
If you notice watermarks on the ceiling, you should immediately check your tiled roof’s condition. The tiles can get damaged, letting the water seep through. The water somehow gets to the rooftop, leaving watermarks all over your ceiling.
Stains all over your ceiling will not only look bad, but if the roof remains unchecked for long, it can cause a lot more structural damage. Obviously, watermarks indicate that there is a leak.
Although you can clean and paint the ceiling, unless you fix the initial leak problem by restoring the roof, watermarks will always find their way to the ceiling.
If there is a heavy rainstorm, but you see water drops seeping down from the ceiling, it indicates a problem with your tiled roof. You can prevent the situation by taking good care of your tiled roof.
When inspecting the roof, you or the roofing specialist Melbourne might notice light coming through the roof. It indicates that there are cracks in the roofing tiles.
These cracks can eventually become more extensive, and in case they don’t, the water can still seep through them, causing structural damage. It can also indicate that your concrete roof tiles are not appropriately placed.
A sagging roofline is relatively easy to repair, but it can be dangerous and must be fixed on time.
Several reasons can cause the sagged roofline, such as water dripping, too much weight, poor construction, or old age. You should hire a professional to fix the sagging roof ridge before it gets worse and cause structural damage.
The roof bedding is the cement mortar where all concrete tiles are placed, making it the most vital part of the roof structure. It helps to keep all roofing tiles in place and prevent the water from going inside the roof.
Unfortunately, it tends to damage over time and needs replacement. It’s called re-bedding. Weak roof bedding can cause the tiles to fall out of their place, the roof starts leaking, and overall, the severity of damages increases.
The best decision in such a situation is to hire a professional roofer to restore the tiled roof.
Once you notice any of the above-discussed signs of roof damage, it’s time for tiled roof restoration. Here discussed are all the steps that a professional roof restoration process involves:
The first thing a professional roof restoration company does is conduct a thorough inspection to pinpoint the locations where there is damage. They will inspect thoroughly before determining the most appropriate course of action.
The professionals will replace the tiles, either the damaged ones or all. They examine the watercourse to know whether the concrete tiles can handle the pressure and ribs can effectively prevent water accumulation, which can weaken the roof.
In addition, they look for cracks and leaks, especially the ones caused because of misplacement. If concrete tiles are weak, roofers recommend opting for entire tiled roof restoration and, thus, replace all the tiles.
Roofers will not only replace the concrete tiles but also will clean the roof. They often use water with adequate pressure to clean the tiles without damaging them. The cleaning process will help remove all the dirt and mould harmful to the concrete tiles in the long run.
The bedding is the framework that holds all roofing concrete tiles in place. If the bedding is damaged, it needs replacement. For this process, you should hire roof construction professionals, as the process can be very demanding and potentially dangerous.
They will remove the entire old cement bedding and install the new one. The entire re-bedding process can take a few days, but it is worthwhile as it enhances security and comfort.
The cost of restoring the concrete tiled roof can alter depending on multiple factors, like the roof’s size, the quality of tiles used, and labour costs. In addition, the price will depend on whether you want to repair, restore, or replace the entire roof.
Regarding roof restoration cost, it lies between a partial roof repair and replacement. The ideal way to get an accurate estimate for roof restoration is to consult a professional roofing company.
Tiled roof restoration is a quick job, but it can be potentially dangerous. Your one wrong step can cause more damage to the roof and your home, risking your safety and costing you more in the long run.
So, it’s always recommended to get professional help if you notice any of the above-discussed signs of roof damage.
The roofing specialist Melbourne will inspect your roof and perform all the above-discussed steps to restore your tiled roof.